Menu ☰

Cladding Insights

ACM Panels: A Practical Guide for Your Exterior

← All Articles

Everything You Need to Know About ACM Panels

Aluminum composite material, often called ACM, is used to create crisp panelled exteriors. Choosing it involves more than selecting a colour. The panel product, layout, attachment system, and surrounding wall details all need to work together.

What is an ACM panel?

ACM combines two thin aluminum skins with a bonded core. Core formulations vary, so products that look similar can have different performance characteristics. ALPOLIC’s introduction to ACM explains this layered construction and the distinction between common core types.

Ask for the full product designation in your quotation. “ACM panel” is a material category, not a complete specification.

Start with a deliberate panel layout

Consider how the joints align with windows, doors, corners, and roof edges. Review a marked-up elevation before fabrication. This is the time to decide where you want uninterrupted surfaces and where a joint becomes part of the design.

Bring the same attention to returns and edges. A clean front elevation can lose its consistency if the corners, soffits, or transitions are left unresolved.

Understand the whole wall

The outer panel does not describe every layer behind it. Ask the project team to identify the attachment system, drainage approach, flashings, and any insulation or air-barrier work included in the scope. For background on managing moisture in wall construction, see the Canadian Wood Council’s moisture guidance.

For fabrication, use the instructions for the selected material. ALPOLIC publishes separate fabrication manuals for different products, which illustrates why one set of details should not be assumed to suit every panel.

Check fire performance for the proposed assembly

Do not treat a finish colour or an “FR” label as proof that a complete wall is approved. ALPOLIC describes fire testing of specific materials and wall assemblies and identifies the local authority as responsible for acceptance. Request applicable Canadian documentation and project-specific review. See ALPOLIC’s fire-safety information.

Make the quotation easy to compare

  • Confirm the manufacturer, product, core, thickness, and finish.
  • Review panel sizes, joints, corners, and visible trims.
  • Identify the preparation, attachment, and water-management work included.
  • Request care instructions, warranty terms, and a realistic schedule.

Ready to explore a layout? Browse our ACM panel page or contact Pro Cladding with your drawings and project location.

Ready to Plan Your Exterior?

Share your project location, drawings, and preferred materials. Our team will help you work through the next steps.